How To Use A Wet Dry Vacuum Cleaner

Wet dry vacuum cleaners are handy enough to make cleaning a really easy task. However, they are also a multi-faceted tool that gets the job done thoroughly.

Wonderfully, they come in various sizes and can be used in both home or any commercial properties like workshops, offices, school/colleges etc. On the other-hand Industrial places like mills, stations or laboratories uses heavy duty wet/dry vacuums (read more on Industrial vacuum cleaners here).

Before cleaning with a wet and dry vacuum, it is important that you know how to use the machine. This way, you’ll get the desired results and won’t damage your vacuum while cleaning.

Here is a comprehensive guide on how to use your wet dry vacuum.

Step 1 – Remove Stagnant Water

Always get rid of any stagnant water that may be in the hose. To do this, put the hose inside a bucket of water. Then, turn the vacuum cleaner on and place the cleaner in a nice dry area.

Also, make sure to empty the inside drum of water when it gets filled up.

remove stagnant water vacumm

Step 2 – Choose The Right Filter

Like you already know, a wet and dry cleaner can suck up both liquids and dry dirt. Therefore, it is very vital that whenever you’re switching from one task to another, you change filters as well.

Just by clicking a button on it, you can change the functional ability of the machine. Use a foam filter for liquids and a paper one for dust particles.

Step 3 – Adjust Attachments

All vacuums have attachments. Many come with brush attachments that help to scrap dust particles off after which they’re sucked up by the vacuum into the hose. Some other attachments come with endings that are narrow enough to reach difficult nooks and corners.

There are also many attachments that are suitable for cleaning car seats, mats and other surfaces. All these complementary tools are made to enhance better cleaning.

Always choose the right filter and an appropriate attachment for your desired spot before vacuuming the area. Ensure to cover every inch of the area you’re cleaning.

Step 4 – Use The Exhaust Portion

Though an attachment, the exhaust portion is a completely different kind. Many of the wet-dry vacuums available today have the ability to suck air in and blow air out as well. If you have adequate knowledge of this ability cleaning the outdoors will be much easier for you.

When dealing with large debris like leaves, the best way to successfully clean them up is to first move them to one side using the exhaust portion. Once this is done, they can then be collected easily.

Step 5 – Empty Tub

It is vital that the tub is emptied frequently, more so if you use your vacuum regularly. Normally, pegs attach the tub’s lid to the base.

If you un-clip the pegs, you’ll be able to extract the lid and pour out the contents of the tub. Always clear the tub right after cleaning liquid spillages with your vacuum.


There you have it! Your very simple guide to using a wet-dry vacuum cleaner. Now if you have not yet purchased any wet and dry vacuum cleaner, you must get one. Once you master all these tips and apply them as you vacuum, you’ll discover that a wet-dry vac is quite easy to use.

Now, why don’t you go ahead and apply all you’ve learned from this article and get your hardest cleaning task done.

  • Updated March 23, 2020
  • Blog
Click Here to Leave a Comment Below 0 comments

Leave a Reply: